Valve Brackets Electric Actuators
Valve Brackets-Pneumatic accessories
In an ideal world, all valves would be direct mount and all stems would be the same. However, in the
Features and Benefits
The Luobai rack & pinion pneumatic actuator produces linear torque output in a compact design utilizing the same body and end caps for double-acting and spring-return units.
Degree of Travel
The standard angle of rotation is 90°. Luobai actuators feature dual travel stops that provide ± 10° stroke rotation on both the opening and closing phases of the actuator stroke. 110° of travel in a standard 90° actuator!
Honed Bore for High Cycle Life
Extruded aluminum body is internally machined and honed to exact specifications. Honing prevents dry spots from forming within the actuator bore and therefore eliminates premature seal failure—a critical aspect to long cycle-life. All internal and external surfaces are hard anodized for corrosion resistance, with all units permanently lubricated at the factory.
Shaft bearings isolate the pinion gear from the housing and support the shaft for high-cycle applications. Many competitive manufacturers do not provide this critical feature.
High Cycle-Life Wear Pads
Pistons incorporate double wear pads (skates) to separate the rack from the actuator wall and serve as both guide and wear bearings.
Rugged Tooth Design
The pinion teeth are engaged the full length and stroke of the piston, and designed for the toughest flow conditions. The pinion height allows manual override without needing to remove the indicator.
Multiple Output Shafts
The female pinion drive is standard with a double-square output drive, and optional with a double-D drive, keyed drive and designs to meet your specific requirements.
Namur VDI/VDE 3845 and ISO 5211 dimensions on all sizes. No special blocks are required to mount solenoid valves, limit switches or positioners.
High Visibility Beacon
External open/close indicator as standard, available for all rotations.
Safe Preloaded Spring Cartridges
Epoxy-coated special steel springs are pre-loaded with non- metallic materials. The stainless steel end-cap fasteners are extra-long to allow for spring relaxation. All parts are corrosion-resistant.
Alternate Operating Media
Air pressure operation from 40 to 150 psi (2 to 10 Bar). Water, nitrogen and compatible hydraulic fluids may also be used to power the actuator.
Stainless Steel Fasteners
All external fasteners are corrosion-resistant stainless steel.
Luobai offers a wide range of adapters for many different types of valves—including butterfly valves, ball valves and plug valves—as well as a variety of pneumatic and electric automation accessories suitable for diverse industrial environments.
100% of all units are factory pressure and leak tested, and individually boxed for shipment.
All units are externally marked with a progressive traceable serial number.
Best Warranty In The Industry
Luobai products are covered by our unlimited cycle-life warranty. Contact your local distributor or sales representative for more details.
For Immediate Service Please Call: 0577-8689-8000